> SPECIFICATIONS (Movement)

SPECIFICATIONS (Movement)

Caliber no.

9RA5

Features

Hour hand, minute hand, seconds hand, date indicator, power reserve indicator (10 o’clock position)

Frequency of crystal oscillator

32,768 Hz

Loss/gain

Average monthly rate of ±10 seconds (equivalent to daily rate of ±0.5 second) *1

Operational temperature range

−10°C to +60°C *2

Driving system

Automatic winding type with manual winding function

Hand movement

Glide motion

Power reserve

Approx. 120 hours (5 days) *3

IC (Integrated Circuit)

Oscillator, frequency divider, and spring drive control circuit (C-MOS-IC): 1 piece

Jewels

38 jewels

Caliber no.

9RA2

Features

Hour hand, minute hand, seconds hand, date indicator, power reserve indicator (case back side)

Frequency of crystal oscillator

32,768 Hz

Loss/gain

Average monthly rate of ±10 seconds (equivalent to daily rate of ±0.5 second) *1

Operational temperature range

−10°C to +60°C *2

Driving system

Automatic winding type with manual winding function

Hand movement

Glide motion

Power reserve

Approx. 120 hours (5 days) *3

IC (Integrated Circuit)

Oscillator, frequency divider, and spring drive control circuit (C-MOS-IC): 1 piece

Jewels

38 jewels

The average rate is estimated in a condition when the watch is worn on your wrist within a temperature range between 5°C and 35°C.

Under a low-temperature condition (below 0°C), always keep at least one-fifth of the watch power shown by the power reserve indicator.

When the power reserve indicator shows the power supplied by the mainspring is full, continuous operating time may be shortened depending on the how the product is used.

The specifications are subject to change without prior notice due to product improvement.