> FUNCTIONS OF DIVER’S MODEL > Unidirectional rotating bezel

Unidirectional rotating bezel

By using the rotating bezel, you can measure the elapsed time since the start of an event or an activity such as diving.

This watch has a unidirectional rotating bezel. As the evaluation of the remaining air in your cylinder is based on the information of the elapsed time of the dive, the rotating bezels for a diver’s watch is designed to rotate only counterclockwise, so that the watch is prevented from displaying the elapsed time shorter than it actually is.

CAUTION

Make sure that you check the correct remaining amount of air in your cylinder before diving. Use the display of the elapsed time by the rotating bezel only as a guide during diving.

How to use the rotating bezel

  1. At the start of the activity, for which you want to measure the elapsed time (for example, when you start diving), rotate the bezel so that the Bezel-GS_B mark on the bezel is aligned with the minute hand.

  2. Read the graduation on the rotating bezel to which the minute hand is pointing.

【Ex.】 When you start diving at 10:10.

9R_Divers_Rotating Bezel-1 + How to use Rotating bezel (9R)-1

Start of the dive

Align the Bezel-GS_B mark with the minute hand

Rotating direction of the bezel

9R_Divers_Rotating Bezel-2 + How to use Rotating bezel (9R)-2

After 15 minutes has elapsed

Elapsed time

Read the graduation on the rotating bezel to which the minute hand is pointing.